Central heating fireplaces
Showing all 6 results
-
Fireplace 20 – 25 kW C-25
Nominal heat output: 12 – 25 kW Dimensions (W x D x H): 65x75x115 cm Flue gases exhaust: Ø 200 mm They consist of qualitative boiler sheets. The water tank is mounted at the back, left or right and optionally above. Efficiency is high and the fireplace can be mounted in combination with every other heating type.
-
Fireplace 30 – 35 kW C-35
Nominal heat output: 20 – 35 kW Dimensions: 85x87x125 cm Flue gases exhaust: Ø 200 mm They consist of qualitative boiler sheets. The water tank is mounted at the back, left or right and optionally above. Efficiency is high and the fireplace can be mounted in combination with every other heating type.
-
Fireplace 30-35 kW with oven
Nominal heat output: 35 kW Dimensions (W x D x H): 85 x 87 x 150 cm Flue gases exhaust: Ø 200 mm Firebox (boiler) of the fireplace is made of highly resistant quality boiler sheets. The water tank is located at the rear,on the sides and at the top. This is why SENKO fireplaces have a high efficiency rate and can be mounted combined with any other heating system.
-
Fireplace 20-25 kW MODERN
Nominal heat output: 12 – 25 kW Dimensions (W x D x H): 65 x 75 x 115 cm Flue gases exhaust: Ø 200 mm Firebox (boiler) of the fireplace is made of highly resistant quality boiler sheets. The water tank is located at the rear,on the sides and at the top. This is why SENKO fireplaces have a high efficiency rate and can be mounted combined with any other heating system. NEW exterior (black) glass on firebox and ash box door – MODERN line!
-
Fireplace 30 – 35 kW C-35 MODERN
Nominal heat output: 20 – 35 kW Dimensions (W x D x H): 85 x 87 x 125 cm Flue gases exhaust: Ø 200 mm Firebox (boiler) of the fireplace is made of highly resistant quality boiler sheets. The water tank is located at the rear,on the sides and at the top. This is why SENKO fireplaces have a high efficiency rate and can be mounted combined with any other heating system. NEW exterior (black) glass on firebox and ash box door – MODERN line!
-
Fireplace 30-35 kW with oven MODERN
Nominal heat output: 35 kW Dimensions (W x D x H): 85 x 87 x 150 cm Flue gases exhaust: Ø 200 mm Firebox (boiler) of the fireplace is made of highly resistant quality boiler sheets. The water tank is located at the rear,on the sides and at the top. This is why SENKO fireplaces have a high efficiency rate and can be mounted combined with any other heating system. NEW exterior (black) glass on firebox and ash box door – MODERN line!
Advantages of SENKO central heating fireplaces
- Manufactured in accordance with the EN 13229 standard and comply with all the requirements set by this standard
- Intended for space heating and central heating
- Made of stainless steel boiler plates and castings of quality grey cast
- Boiler is made of highly resistant quality boiler sheet according to EN 13229
- Possibility of connecting an external (primary) combustion air
- Intake of secondary air into the firebox – additional fuel efficiency and combustion of harmful gases
- Firebox door equipped with fireproof glass
- High efficiency rate
- Can be connected in combination with any other heating system