| Nominal heat output: | 35 kW |
| Dimensions (W x D x H): | 85 x 87 x 125 cm |
| Flue gases exhaust: | Ø 200 mm |
Firebox (boiler) of the fireplace is made of highly resistant quality boiler sheets. The water tank is located at the rear,on the sides and at the top. This is why SENKO fireplaces have a high efficiency rate and can be mounted combined with any other heating system. NEW exterior (black) glass on firebox and ash box door – MODERN line!
| Nominal heat output | |
|---|---|
| - boiler | |
| - room | |
| Amount of water in boiler | 55 L |
| Weight | |
| Flue gases exhaust | Ø 200 mm |
| Primary air intake | Ø 150 mm |
| Required flue draught | 16 Pa |
| Efficiency | |
| Air regulation - primary | auto |
| Air regulation - secundary | auto |
| Boiler protection | prepared for boiler overheating thermal protection |
| Firebox door | fireproof glass |
| Energy efficiency class | A |
| Nominal heat output: | 35 kW |
| Dimensions (W x D x H): | 85x87x125 cm |
| Flue gases exhaust: | Ø 200 mm |
They consist of qualitative boiler sheets. The water tank is mounted at the back, left or right and optionally above. Efficiency is high and the fireplace can be mounted in combination with every other heating type.
| Nominal heat output: | 25 kW |
| Dimensions (W x D x H): | 65x75x115 cm |
| Flue gases exhaust: | Ø 200 mm |
They consist of qualitative boiler sheets. The water tank is mounted at the back, left or right and optionally above. Efficiency is high and the fireplace can be mounted in combination with every other heating type.
| Nominal heat output: | 35 kW |
| Dimensions (W x D x H): | 85 x 87 x 150 cm |
| Flue gases exhaust: | Ø 200 mm |
Firebox (boiler) of the fireplace is made of highly resistant quality boiler sheets. The water tank is located at the rear,on the sides and at the top. This is why SENKO fireplaces have a high efficiency rate and can be mounted combined with any other heating system.
English 
Deutsch 
Hrvatski 
Magyar 
Română 
Slovenščina 